Knowledge

Shoe polish is a product used to polish and repair leather shoes or boots and enhance its water resistance, which can extend the life of footwear. Shoe polish is usually waxy or creamy. A preparation for wiping the surface of a shoe to make it clean and bright. There are liquid, semi-solid, solid parts, the main components are wax.

Shoe polish is a product used to polish and repair leather shoes or boots and enhance its water resistance, which can extend the life of footwear. Shoe polish is usually waxy or creamy.

A preparation for wiping the surface of a shoe to make it clean and bright. There are liquid, semi-solid, solid parts, the main components are wax.

According to requirements, it can be made into a solvent type or a cream type.

For hundreds of years, a variety of substances have been used as shoe polish, starting with natural substances such as wax. Hyundai's first shoe polish brand is Erdal, a brand of the German Werner & Mertz GmbH group. The brand was officially registered in 1901. Prior to this, the German Werner & Mertz GmbH Group had 35 years of shoe oil development experience, and Kiwi was invented in 1906. Modern shoe polishes are usually made from a mixture of natural and synthetic materials, including petroleum by-products, dyes, etc., using a simpler chemical refining process. Shoe polish ingredients may be toxic, and misuse can be toxic.

The semi-solid shoe polish is prepared as follows: a certain proportion of paraffin wax, insect wax, etc. are heated and melted, and then fully mixed with turpentine; in another container, the oil-soluble black (a black dye) is heated and melted, and a small amount of turpentine is added. Stir well, pour into the wax solution, mix evenly, and then turn into black shoe polish.

After the shoe polish is applied on the upper surface of the shoe, the solvent evaporates, leaving a thin layer of wax film, which can achieve waterproof, insect-proof, bright and protective leather, and enhance the appearance of beauty.

The main ingredients of shoe polish are paraffin and shellac. Shellac makes the shoes soft, tough and prolongs life. It is the main material for shoes. There are many brands of shoe polish on the market, but they can be divided into three types: emulsion type, oil type and liquid type.

Emulsion type

It is the most common type on the market and the most used one. It is especially suitable for wet and rainy areas. The emulsion type shoe polish is mainly composed of wax, water and shellac oil. It is divided into oil-in-water type and water-in-oil type. Kind, the former is universal.

Oil type

It is mainly composed of wax and oil and does not contain water. Therefore, it is more water-repellent than the emulsion type, but if the oil-type shoe polish is used for a long period of time, the leather color becomes lighter, and the oil-type shoe polish and the emulsion-type shoe polish are better combined.

liquid

It is made of emulsifying wax and water. This shoe polish does not need to be wiped. Just apply it on leather shoes to make the leather shine.

Anyone who applies the shoe polish, but only by their own ideas, often there will be various errors, not only can not protect the shoes, but will damage the shoes to varying degrees. The first time the shoes are rubbed, it should be done before the new shoes are worn. When the shoes are not stained, the color and brightness of the shoes can be well maintained. In the future, during the wearing process, the shoe polish should be used once every two to three days. Different leathers require different shoe polishes.

Soft cowhide

It is best not to use a brush to oil, use cotton cloth is best, will not cause damage to the shoes. Clean the shoes before oiling, do not wash with water, use a semi-wet cloth to clean the dust, then squeeze the shoe polish on the cotton cloth, and then wipe it on the leather surface. Do not use too much force when wiping, master the rhythm, apply a little longer, wait until the color is even.

Water stained leather

It is best to use colorless shoe polish or sheep oil to wipe it. It is best to use cotton cloth instead of brush.

Lapi

All the wax skins can't be used for shoe polish, otherwise they will change color, and once they change color, they will not change back to the original color. Usually, it is good to wipe them clean with a clean cotton cloth.

Patent leather

The patent leather is a leather with a large surface and a high hardness. It does not need to apply shoe polish. It is good to wipe the dust with a soft cloth. It should be protected when wearing.

Matte leather

The nubuck leather and the suede are of the same nature. They are usually cleaned with a brush. When brushing, follow the brush in one direction. Spray it with a scrub skin care agent every other week or so. Then put it in a well-ventilated place and dry it!

1. Remove the dirt and dirt from the soles and brush off the dust between the seams and the laces with a brush.

2. Wipe off the dirt on the upper, the applied shoe polish, etc. with a cloth dampened on the finger.

3. Apply a proper amount of shoe polish on the leather surface of the shoe, and apply the shoe polish evenly with a soft cloth. It is advisable to use the same color as the shoes or a lighter shoe polish. If you need to make the shoes bright and have good waterproof performance, you can apply a thin layer of oily shoe polish.

4. Brush with a brush to make the shoe polish nutrients penetrate into the leather, and finally polish with a soft cloth, while also ensuring that the shoes will not stain the pants.

1. Shoe the shoes with the remaining milk or the stale milk to prevent chapped.

2. When wiping shoes, add a few drops of vinegar to the extruded shoe polish, which will make the shoes bright and not easily stained with ash.

3, to polish the shoes, you can drop a few drops of water in the oil of the shoes. Old shoes can be coated with a layer of floor wax after rubbing the shoe polish, then polished with a soft cloth.

4, using old stockings or old nylon socks on the shoe brush, smashing shoes and shoes, can make the shoes shine particularly bright.

5. Light-colored shoes are easily soiled. When you are shoes, apply lemon juice to the upper, then polish the shoe polish, or rub it with toothpaste. It will be as bright as new.

6, white shoes are dirty, you can first wipe with a vinegar, then wipe with a dry cloth, then white shoes oil, decontamination effect is particularly good.

The choice of shoe polish should be light, easy to shrink, and not rich in special smell after rubbing on the shoes.

1. Select aluminum hose for shoe polish, the appearance of the pattern is clear, the color is bright, the body is straight, the mouth is full, the tail welding is tight, not leaking, the cover is not opened and the smell of shoe polish is not smelled; the shoe polish is not opened after the cover is opened Overflow, when the tube is lightly pressed, the nozzle is oily, and the extruded shoe polish is finely lubricated. The cap screw can be tightened and easily unscrewed.

2. Select iron flat boxed shoe polish, the appearance of the pattern is clear, the color is bright, the smell of shoe polish can not be smelled before the cover is opened. After opening the cover, the surface of the shoe polish is smooth, bright, smooth, no grain, no crack, no hoarfrost, no knot Piece. The shoe polish and the iron cover are seamless and the cover is opened freely.

3. Liquid shoe polish should be selected with a beautiful appearance, no cracks in the package, reliable packaging cover, and no odor overflow.

Nowadays, people's living standards and quality are slowly improving, and their wearing has also been greatly improved. There are more and more people wearing leather shoes. The purchase of shoe polish has become the biggest worry for the majority of leather shoes lovers. it's the best?

General high-grade shoe polish is divided into: bright and matt

High-end leather shoes sports shoes dry cleaning maintenance advice: get a professional dry cleaning shoe store maintenance and cleaning is better.

Buying suggestions: Different shoes choose different shoe polish. When buying shoe polish, carefully observe which type of shoes you have. If the shoes are very bright, you should choose bright shoe polish. After the shoes are rubbed, the shoes will be brighter than the original. If the shoes themselves are not bright or dark, they should choose a matt type brightener. After the shoes are worn, the shoes will not light up again.

Choice of liquid shoe polish: Products with beautiful appearance, no cracking of the package, reliable packaging cover and no odor overflow should be selected.

Aluminum hose with shoe polish selection: the appearance of the pattern is clear, the color is bright, the body is straight, the mouth is full, the tail welding is tight, not leaking, the smell of shoe polish can not be heard when the lid is not opened, and the shoe polish does not overflow after opening the lid When the pipe is lightly pressed, the nozzle is oily and the extruded shoe polish is finely lubricated.

Iron flat boxed shoe polish selection: the appearance of the pattern is clear, the color is bright, the smell of shoe polish can not be smelled before the cover is opened. After the cover is opened, the surface of the shoe polish is smooth, bright, smooth, no grain, no cracks, no hoarfrost, no agglomeration . The shoe polish and the iron cover are seamless and the cover is opened freely.

According to the low temperature conditions in some areas, there is a specially developed shoe polish that can withstand cold and freeze.

Technical Parameters

1. Appearance: milky white homogeneous liquid;

2, PH value: 7-8;

3, cold resistance: natural thawing after icing does not affect the use effect;

1. This product is made of high-grade synthetic wax, high-molecular bright resin, surfactant, high-grade essence, etc.

2. It has the functions of active decontamination, shallow mark repair, dustproof, quick drying, brightening, nourishing, no fading;

3. Good cold resistance, good folding resistance, repeated folding, no cracking, no dilution at any ratio

Long-term storage at low temperatures will not damage the performance of the product, and the gloss will always be the same;

Antifreeze shoe polish is suitable for all kinds of leather shoes, leather clothes, leather goods, leather sofas, etc. It is not recommended for use on anti-fur, light-colored skin, benzene-dyed skin, Niu Ba Ge, etc. When using it for the first time, please try this product in an inconspicuous position on the leather surface.

Instructions

More than zero degree: Use the soft white cloth or spunlace non-woven fabric containing this product to evenly wipe the surface of the leather shoes 1-2 times. When the surface of the leather shoes is completely dry, it can show high gloss and nourishment.

Below zero: The frozen shoe towel oil will be naturally thawed before it can be used, without affecting the use effect. And once used, you can continue to use this product for one week, just use the soft white cloth without lint to light the surface and restore the light.

Protected from light and sealed storage for more than 6 months at 10-25 °C. (The shelf life of wet wipes depends mainly on the preservative)

Precautions

1. The technical performance and application methods described in this description are for professional reference only, and are not a commitment to the use effect. Where new products are used and the process is changed, strict feasibility tests must be carried out first for the best use effect;

2. If you accidentally get into the eyes, please rinse with plenty of water.

Shoehorn: also known as "shoes", "shoes slippery", an auxiliary tool used by the Han people to wear shoes. A smooth plate that helps to reach into the shoe while wearing the shoe. The materials are animal bones, horns, copper, ivory, and today's useful plastics.

The shoehorn can help to wear shoes, one step in place, no need to untie the shoelace or carry it, nor will it step on the back of the shoe (for those who like to be lazy and care for shoes, convenient and practical)

When you wear shoes, you should first loosen the shoelace and then use the shoehorn. It is the first step in shoe maintenance. Shoes are more damaged from the heel. Therefore, the shoehorn can be used more and more. The home can be prepared with a long handle, but it is usually ready to carry it with you. In addition, do not squeeze hard when wearing shoes, you can first put your foot into the shoes, then use the shoes to pull the heel and insert it into the shoe vertically, then pull the shoe out after hard pressing the heel. Leather shoes with laces should be developed to loosen the laces and then wear them.

A shoe brush is a tool for brushing shoes with black or brown hair at the front and a handle at the back.

Usually made of wood or bamboo, some are made of plastic. Brushing is usually made of PP plastic wire, bristle, horseshoes, etc.

Pp plastic wire: PP material has excellent anti-hygroscopicity, acid and alkali corrosion resistance, anti-solubility, almost no water absorption, no contact with most chemicals, brush made of pp material is cheap and practical, application widely. The disadvantage is that it becomes brittle at low temperature, and it is not wearable and aging.

Hog: The toughness is flexible, not easily deformed, resistant to moisture, and is not affected by heat and cold. The brush made of bristle is soft and hard, just tough and does not scratch the shoes. It is a very good brush material.

Stables: Stables are the mane or tail hair of the equine horse. The horse is soft and elastic, and is made of horsehair, which is used for relatively high-grade, soft leather shoes.

Wood: The wooden handle is widely used. The material is rich in source and easy to process. The disadvantage is that it is easy to be colored by shoe polish.

Bamboo: The bamboo handle has a good touch and is easy to process. The disadvantage is that it is not resistant to moisture and is prone to mildew.

Plastic quality: The plastic handle has excellent acid and alkali corrosion resistance, and does not interact with most chemicals. Therefore, it does not appear to be stained by shoe polish. The disadvantage is that it is easy to age and become brittle.

1. Use a large shoe brush to lightly brush the entire shoe to see if the protruding part of the shoe edge is contaminated with dirt.

2. Use a small shoe brush to remove dirt and fine dust from the unevenness of the shoe edge or seam.

3. Loosen the shoelace and brush the dirt that is not easily visible from the outside with a small shoe brush.

4. Squeeze a little clean oil on the cloth and spread the whole shoe. At this time, the most important thing is to thoroughly clean the old shoe polish remaining on the shoes.

In addition to clean.

5. Take another piece of cloth (not to be mixed with a cloth that uses clean oil), apply a little shoe polish and spread the entire shoe. Shoe polish can be taken about the size of the little finger.

6. After applying the entire shoe, polish the entire shoe with a clean soft cloth. The details are also not sloppy.

7. Finally spray a waterproof mist. Waterproof fog not only prevents the shoes from invading the water, but also has the effect of being less susceptible to dirt. After the waterproof mist has dried, put the shoe last into the shoe.

Synthetic leather

Synthetic leather is not easy to wrinkle, general shoe brush can be used for cleaning, but pay attention to grasp the strength, do not use too much force.

Matte leather

Matte leather is usually more wear-resistant, you can use a general shoe brush. If it is a nubble skin that is easy to fluff, you should use a piglet or a softer pp plastic silk shoe brush.

Patent leather

The patent leather is very easy to scratch. When cleaning, it is best to use a horse shoe brush or a soft pp plastic silk shoe brush. Remember not to use a rough shoe brush, otherwise the shoes are easily damaged. When cleaning, the strength should be even and soft, pay attention to protection.

Leather: The leather is soft and easy to scratch, so it is best to use a bristle shoe brush to clean the stain without causing damage to the shoe.

An orthopedic insole is a product that changes the ground to suit the wearer's individual foot shape. Just as many people need to wear glasses (technically called visual correction), people with biomechanical abnormalities of the lower extremities or mechanical problems of the feet caused by these abnormalities need to wear a corrective product one foot orthopedic insole.

Orthopedic insole is based on the biomechanical design of the foot. The unique dual density 100% EVA (ethylene vinyl acetate) structure allows for the creation and addition of a wide range of modifications and eccentricities on orthopedic insoles, making it a customizable orthopedic insole that can be used The plaster mold is directly attached to the patient's foot and provides sufficient space and protection for the foot. The orthopedic insole can be heated and molded onto the patient's foot or in a plaster mold, or it can be sanded and formed using a bench grinder, and various bending angles can be molded under heat and pressure (these angles can also be eliminated by heating). The orthopedic insole is made according to the principle of biomechanics, which is made by the normal model of the normal person (that is, according to the normal ergonomic structure), and the heel angle of 5° is set to increase the angle to the most force and walking, 42° sagittal inclination Balance and coordinate the support and stability of the pelvis. Customized insoles have a good effect on foot care, increasing walking time and exercise energy. Combining unique angles and curves in the design, the patented dual density system provides patients with the dual benefits of support and comfort.

Your next hike might not feel like an epic adventure without the right hiking boots, but that’s not all you need to make it a comfortable journey. The right insoles can really seal the deal. These anatomically designed pads help mitigate moisture control, bacteria and odor, as well as other issues that can cause injury and discomfort.

For hikers, good insoles can mean a better performance and less fatigue. They’re excellent choices to help mitigate the effects of plantar fasciitis, overpronation (feet roll in) and under-pronation (feet roll outward), and heel slippage. Those who have low arches will benefit from the enhanced stabilization that hiking insoles provide.

Here, we’ve researched some of the best insole options for hikers. You can shop for all of them now.

The global foot orthotic insoles market has been segmented based on product, material, application, user age group, distribution channel, and region. In terms of product, the global market has been bifurcated into prefabricated and customized. Based on material, the global foot orthotic insoles market has been categorized into thermoplastics, polyethylene foams, leather, cork, composite carbon fibers, ethyl-vinyl acetates (EVAs), gel, and others. In terms of application, the global market has been divided into sports & athletics, medical, and personal comfort. Based on user age group, the global foot orthotic insoles market has been classified into adults and pediatric. In terms of distribution channel, the market has been divided into drug stores, hospitals & specialty clinics, online stores, and others.

Foot pain sends close to 2,000,000 people to their doctors every year.  Many times the diagnosis is plantar fasciitis. There are any number of treatments.  And chiropractors have some options worth exploring.

Dr. Ted Matthews practices chiropractic in Avon, Indiana. He’s seen a number of patients with symptoms of plantar fasciitis.

“Most of the time you see it at the heel of the foot,” says Dr. Matthews. “It can cause pain for a long period of time.”

Dr. Matthews uses several tools and he’s likely to assign some “foot homework” to his patients. One of the better known tools is called a gwasha.  It scrapes the bottom of the foot and heel to break up adhesion.

“What we do is flex the foot,” says Dr. Matthews.  “And we take this tool and scrape down the sole of foot right down to the heel. That’s commonly where they get the pain.”

Plantar fasciitis strikes most people between the ages of 40 and 60.  More women than men get it. And it’s most commonly found in military personnel, dancers and those with a weight problem. It can take six months to go away.

“Arch support is key whenever you are dealing with plantar fasciitis, so there is a lot of take home work. We also  recommend orthotics to help maintain the arch area.”

A simple treatment is rolling a can under your foot. Massage can help.  Dr. Matthews says certain feet adjustments might help ease some of the pain too.  There is also a device called a thermostem probe.  It can emit heat or cold and has some of the scraping characteristics of the gwasha tool.

“We usually do both but this is preferable because it has the electrical stimulation too. And that can take some of the pain away,” says Dr. Matthews.

It does take several treatments to get a beneficial effect.  Dr. Matthews also recommends wearing a device at night that keeps your foot flexed.

There are special considerations women need to take into account when shopping for running shoes. “Women’s shoes are generally wider in the forefoot and toe and narrower towards the heel.

Here’s a quick checklist of features to keep in mind when choosing the best running shoes:

• Supportive cushioning in the arches and heels
• A wide, round toe box
• A breathable and flexible mesh upper
• Guide rail or post on the medial side to control pronation
• Deep heel cups for stability
• Removable insoles, in case you want to use your own orthotics

But whether you have a foot issue or not, it’s best to get a professional shoe evaluation with a podiatrist or running coach to get a proper fit before you spend a fortune on the wrong pair. A podiatrist can tell whether you’ll need more support on your arches or heel, and be able to recommend a shoe that best fits your needs. (Pro tip: Try shoes on at the end of the day when your legs and feet are swollen.)

Choosing the best running shoes takes trial and error, so it’s important to try on a pair of sneakers and see how you feel in them while running before deciding to buy them. Not sure where to start? We did the work for you and rounded up the best running shoes for women, all approved by doctors.

1. It's soft, comfortable, reusable, anti-skip and washable.

2. It's convenient for you to use it.

3.Foot Care,Comfortable,Adjust shoe size.

Sports Silicone Gel Insoles:

1.Reduce the vibration of the foot due to the foot injury during exercise.

2.Effectively support the arch and reduce the pressure on the arch area, the arch relieve fatigue and       pain.

3.At the same time has the effect of deodorant.

1, basically should try to avoid cleaning the insole. If there is any odor, put the shoes in the air

circulation to dry, or even use the footwear deodorant to remove the odor.

2. If the situation is bad, you can wipe the insole with a soft brush and do not use any cleaning agent,     otherwise the surface fabric may fall off.

3. After the shoes are washed, they should be placed in the air circulation to be air-dried. Do not use

a hot air blower or dry hair to blow the insole dry with a hair dryer, otherwise the insole may be

deformed.

sport insole

Our advantages:

♦1. This flat feet insole is comfortable for daily

♦2. Low MOQ with customized logo printed

♦3. Arch support:  suitable arch hold for flat foot customers.

♦4. Supports all arch types – Fits Casual shoes, Sneakers & Work boots/shoes.Trim to fit.

1. Soft, suitable for patients with weight 45~65kg or diabetics.

3. Hard, suitable for patients weighing more than 75kg.

4. Sports/special type, suitable for multi-joint adjustments and sports shoes.

5. Children's type; used by children.

6. High-heeled shape, suitable for high heels.

The China Import and Export Fair is held in Guangzhou every spring and autumn. It is China's longest, highest level, largest scale, most comprehensive product category, the largest number of buyers, and the most widely distributed country. A comprehensive international trade event, known as "China's first exhibition"

Eliminates heel slippage, reduces friction between footwear and skin
•Reduces shock loads to joints, Heels bones and vertebral column
•specially designed to absorb shock and impact in the forefoot and heel, while helping to stabilise and support   the feet
•reduce fatigue, improve athletic performance as well as ensure that pressure on the ankle, knee and hip is reduced.

Share to TwitterShare to LinkedInShare to Pinterest

Both the weight and walking of the human body depend on the normal biomechanics of the foot. Abnormalities in the biological line of the foot, such as long-term walking or irregular movements, can easily cause pain and injury to various joints, and even cause irreversible damage to the body. Foot problems need to be taken seriously.

Nowadays, eSUN, a world-renowned brand of 3D printing materials, has developed many products of prefabricated insoles with the experience of 3D printing materials and equipment. They are [ISUN3D flat foot health insole] and [ISUN3D sports protection insole]; The custom insole is [3D printed full custom insole]

♦1. Mould to your feet for unbelievable comfort

♦2. Low MOQ with customized logo printed

♦3. Arch support:  suitable arch hold for flat foot customers.

♦4. Supports all arch types – Fits Casual shoes, Sneakers & Work boots/shoes.Trim to fit

Anti-slip surface will avoid your feet glide foward.

Relieve metatarsal pain and burning sensation while walking.

Maximum relieve shock and comfort your tired feet.

Suitable for any kinds of shoes.

Superior shock absorption capabilities, reducing the impact force of the foot on the ground, protecting your feet against injury and improving the efficiency of exercise whilst playing basketball.

1. magnetic massage insole is uniquely designed to relax your muscles and is very effective in the treatment of chronic lumbar sprains. At the same time, it can improve blood circulation, eliminate foot odor, foot heat, and reduce nerve pain and pressure. Reduce the pain of low back pain, rheumatism, and strengthen the meridians and meridians.

2. Balance energy in your body to reduce stress, increase energy, balance mind & body, and increase fitness Relieve Overall Body Pain, Tension, Cool & Soothe Feet and Boost Endurance with Acupuncture Technology

Keep warming,breathable and make your feet dry and comfortable all day

Designed for men and women, size is from 5.5 inch to 13.5 inch

Cut along the trim to fit the shoe

Biomechanical shape fit foot arch and provide good and comfort support

Hand wash the product with mild soap and Rinse thoroughly with water

Air dry: the pad will renew its self-adhering surface and stick again many times once dried.

The life of the product is affected by its care, use, and activity level of the individual

The new material is HI-POLY+polyester fabrics, Anti-odor and sweat absorption,breathable, leaving your feet dry and comfortable all day long, while the middle layer foam adds extra insulation and comfort. Shock absorption and shock absorbing function, this layer also has the function of anti-compression deformation, fixing the insole in the boots or shoes.

1.Trim-to-fit insoles add comfort and support to your shoes

2.Multi-density foam offers cushioning and stability

3.Heel part design Comfort at ball of foot absorbs shock

4.Top layer delivers odor-resistant, moisture-wicking comfort

5.The foam insert stabilises walking and guarantees correct posture while the gel at the heel absorbs shocks.

Shock Absorption: Soft elastic honeycomb silicon heel with EVA insert, can effectively protect your foot, relieve the stress and pain of metatarsal arch, heel.

Enhanced Comfort:Absorbs shock,foot cushioning,surface velvet helps keep feet dry.

High elastic Material, convert impact into kinetic energy. Best for Football,Running, high jump, Fitness,long jump, Basketball or any other Intense Sport

Remove the current insoles from your shoes

Do not put Soumit insoles on top of your current insoles in the shoes

Insert Soumit insoles into your shoes, then press and wait for 20 minutes

Can washable with a clear water. Washing is not recommended to avoid losing viscous

4. High-Density Foam Layer: Closed-cell foam supports and cushions the foot for long-lasting

comfort.

5. Organic, Odor-Control Coating: All natural coating that eliminates odor-causing bacteria.

1. Every customer is one of our family,we will be warmly kind to you for any questions.

2. If you need any help,just feel free to contact our team group.

3. We will try our best to meet our customers' requirements.

4. We are always online for you.

5. Our QC team will check the goods seriously before shipment.

6. Delivery time will be promised.

7. Every item you ordered is what you expected.

8. Every problem of the product will be solved for you, as we are family.

Care and Cleaning

Hand Wash Only

1. Wet the entire insoles with cold water. Apply a small amount of shampoo to a clean sponge. Clean entire area. Rinse clean in cold water. Reshape by stuffing with paper towel.

2. Allow to dry naturally and slowly in the shade. Do not use forced drying.

Packing.

Clear polybag as default package,you can also packed as your own style.E.g paper

card and polybag,paper color box ,PP box,and blister and paper card

Shipping.

1) by Express (UPS,DHL.FedEx.EMS).

2) by air or by sea ( we have good forwarders,super service & price .)

3) we also accept your own shipping agent .

1) We can make sample for customer, the samples lead time is 7-10days.

2) Accept payment by paypal.

3) MOQ can be negotiated if you want to add your brand on them.

4) High quality and competitive price.

5) OEM,ODM, Design, Buyer Label Service offered.

6) Logo and package can be customized.

1.Breathable Mesh gives you maximum comfort.

2.Shock Absorption Cushioning Poron Pad for Metatarsal and Heel Cushion

3.Fit a variety of shoe types with removable insoles, such as casual shoes or boots, work shoes, sneakers, work shoes, work boots, etc.

4.Easy trimmed to the size you need.

The insole is made of relatively soft material,so Insoles are perfect for improving performance and reducing pain during physical activity.Good cushioning effect can reduce impact on the joints and muscles, suitable for hiking, climbing, ball games, running and routine, can protect your feet from pain.Ideal for walking, running, cross training, and casual use.

Woman size: 3½-36, 4-37, 5-38, 6-39, 7-40, 8-41

Man size:7-41, 8-42, 9-43, 10-44, 11-45, 12-46

TPE material arch part to lowly support your foot arch during the whole sports.

This gel Insoles available for men and women. Fits with running shoes, dress shoes, boots, sneakers, work shoes, leather shoes. 5 sizes, Please choose the size you need and cut to suitable size by scissors

Free samples with express fee, sample order also can follow Alibaba Trade Assurance

Wipe inside of shoe clean.

remove existing insole the former insoles.

Inserts and Stays in Place Inside the shoe with fabric side up.

Absorb sweat, breathable, prevent from slipping,  comfortable

High color fastness,not easy to fade away

Customizable mouldproof, deodorization, antibacterial  treatment

Customized fabric printing (digital printing ,Sublimation  transfer printing and etc.)

1,Made of EVA foam material,comfortable and durable,good for everyday use.

2,Fabric cover material provides comfortable walking.

3,Different sizes for men and women.

4,Soft heel cushion for better shock absorption.

1. can ensure quality and deliver time.

2. Best & Profession service

3. Fast sample, best price

4. Small quantity is welcomed

5. Our products are safe to European market and USA market. Eco-friendly, no harm to human body.

•Wipe inside of shoe clean.

•remove existing insole the former insoles.

• Inserts and Stays in Place Inside the shoe with fabric side up.

We provide a wide range of packaging options to suit your needs: Blister, Polybag, Insert Card, PP bag, PP box, PVC box, Paper bag, Clamshell box, Display box, Secured Packaging, Sealing. We can imprint your Company logo on product and packaging for promotional gain.

--Provide warmth and comfort even at very low temperatures

--Relieves pressure on the ball of your foot, bunions, swollen feet and joints

--Prevents heel shock by cushioning your every step

--Increases your stability by carding your foot and preventing foot roll

Hand-washable (Recommend using the water with 30  degrees Celsius to wash)

No bleach, no dry clean  ,Naturally dry and don't expose  under sun .

The EVA orthotic insole has a high arch support,when you walk or run with it,your arch will be supported day by day,after months your arch will be come out.

The orthotic insole made by high quality EVA material,with breathable fabric cover,can be used by walk and sports in any shoes.

Provides moderate control and support in walking or casual hiking shoes, work shoes and boots.Comfort and cushioning for all types of leisure or everyday footwear

The insole provides greater stability and arch support. Protects foot from getting tired, pressure and pain; make you feel soft and comfortable. breathable. Prevents foot disease. shock-proof and anti-friction. cuttable, you can adjust the size according to your shoes

1. soft and easy to wear make your foot comfortable.
2. 2.Relieve feet pressure or keen pressure,exercise the muscle,reduce pain
3. 3.Lightweight EVA provides high degree of shocks and impacts absorption

This product is made of fully vegetable tanning leather, which is made of vegetable tanning agent (tannin extract).

It is environmentally friendly, natural, degradable and comfortable.

After years of efforts and improvements, our products have achieved ideal foot feeling and superior wearability, with plump hand feel, strong leather feeling, good breathability and moisture absorption, and consumers feel comfortable when wearing them.

OEM /ODM service available

Package: 1. 1pair/polybag  100pairs/carton (carton size: 59*37*38cm)

2. Custom package

MOQ: 1000pairs

FOB Ningbo/ Shanghai Price

Payment: T/T; L/C and so on

Delivery Time: 2-6weeks

Free sample offered for quality checking

1.Our eva insole is a podiatrist-designed orthotic insole for wider and loose-fitting men's and women's footwears.

2.This biomechanical arch support helps realign body posture, in many cases relieving foot pain, heel pain and lower back pain.

3.It is ideal for any kind of sports activities, including running, biking, hiking, golfing, tennis, etc.

4.This foot arch support orthotic insole can get rid of the odor, keep foot fresh and clean.

Superior Breathable & Quality Material:

Made from high quality breathable velvet fabric in surface layer, high-performance PU memory foam, durable TPU material and Gel cushion. The fabric keep you feel cool, stay dry, odorless, comfortable, blister-free by sucking up sweat and moisture produced by your feet. Perfect for improving performance of physical activity.

Foot, heel, arch, achilles tendon,ball of foll, toe and leg pain, most commonly caused by plantar fasciitis. Our  plantar fasciitis shoes inserts would help you to recover soon from the disturbing treatment and foot pain, offering you a relief and instant comfort.

Clear polybag as default package,you can also packed as your own style.E.g paper

card+polybag,paper color box ,PP box,and blister +paper card

Shipping.

1) by Express (UPS,DHL.FedEx.EMS).

2) by air or by sea ---- we have good forwarders,super service & price .

3) we also accept your own shipping agent .

1. Every customer is one of our family,we will be warmly kind to you for any questions.

2. If you need any help,just feel free to contact our team group.

3. We will try our best to meet our customers' requirements.

4. We are always online for you.

5. Our QC team will check the goods seriously before shipment.

6. Delivery time will be promised.

7. Every item you ordered is what you expected.

8. Every problem of the product will be solved for you, as we are family.

Helps prevent blisters and corn/callus formations

Relief foot pain from high-heel shoes and good for long  walking

Provides superior comfort, cushioning and shock  absorption.

Fits all shoe types-Especially suitable for dress shoes  that have limited room.

Reduce the damage to the foot due to vibration.

The comfortable foot support with metatarsal pad and pronounced heel cup.

The comfortable and anatomically shaped 3/4 foot support made of genuine leather will give healthy and relaxing support and stability.

Additionally, it is highly flexible and elastic. The longitudinal arch support, metatarsal pad and heel cup relieve and relax strained feet.

And due to its anatomical shape, it is also a great choice for people who suffer from flat feet and fallen arches.

Treat your feet with our comfortable foot support made of breathable leather. It makes walking a pleasure.

1)Competitive price & fashionable style

2)High quality and best service

3)Fast and safe shipping

4)Design by customers’ requirement

5)Manufactorer, provides wholesale prices

6)OEM service

1. Keep your heel soft and skin much suppler

2. Protect the heel against heel pain

3. Adjust you shoes to suitable size, make your shoes more suitable for your feet.

4. Break down hard and thickened heel

5. With daily use it leaves feet feeling soft and smooth

Product Show

1. Specially designed for Flat Feet and high Arch feet

2.Relief pain during prolonged standing.

3. Soft layer of blue poron keep heel resisting shock

4. Use this arch support insole ,you can stand and walk around all day without feeling tired or aching.

5. Wearable,protable,non-slip, shock absorption, reduce stress

6.According to biomechanical design medical lateral longitudinal arch and transverse arch.

7.Washable and reusable

8.Top velour and air hole to eliminate odour.

9.Heel cup support help stabilize the foot and prevent injuries.

10.Biomechanical balance, improve planter press distribution and correct flat foot and people who have an awkward gain X leg,O leg and Toe-in.

11. OEM is acceptable

The effective way to change 1 pair per day or two days.

When you are not using it, please dry it in the shade place.

Do not solarize too much.

• Heel Grip Gel Silicone Back Liner Shoe Insole Pad Foot Care Protector
• Can help you adjust the space of inside shoes, make your shoes more comfortable and suitable for your feet.
• The bottom side of cushion are special design, it can be attached your shoes firmly.
• Can be kept a good shape and won't hurt your shoes. Can stick any part inside your shoes.
• When attach in heelpiece, it can prevent your feet raising blisters and scratching.
• Washable and re-usable cushions
• Each cushion can be used over-and-over again

Useful :Great for use on high heels, flats, boot and dance shoe,sport shoes,ect. Insoles is work well with high heel

when you take part in dancing party ,birthday party, wedding party Evening ,keep your feet from hurt for full feet with long time .Best choice for you .

REDUCE FOOT PAIN: Our soft gel cushions that relieve pressure and support soft gel cushions ,Relieve pressure

on bunion joint,Help alleviate foot pain ,Reduce the blister when wear the shoes with our gel pad.

STAY IN PLACE : This gel insoles Available to adjust the high heels 's size ,if you shoes are too large for you and

Stick enough to keep the pad stay in the place .

Multifunction: Self-stick cushions easily to stick and compatible with all types of shoes. You do not need to worry about

pulling, stickiness or skin reaction like you might experience with products that you attach to your skin. Support on walk and work with other outdoor sport also .

Feature:

Skin-friendly and comfortable suede

The insole made of high density PU foam which means better quality and longer durability.

Two way ventilation heel shock absorption

Shoe insoles featured with gel padding under forefoot and heel providing excellent shock absorption.

3D shaping, fit the arch

Biomechanical Shape: Has the most shape to help stabilize and support the foot, which

can help reduce stress on feet, ankles and knees.

Slow rebund memory foam

Use soft memory foam material, give you comfortable feeling when wera the gel insole.

U- shaped heel, protect the foot

Deep Heel Cup keeps your foot aligned and helps support the foot during high impact

activities and long distances.

With cut line, could be cut by yourself, easy to use

The insole adopt Ultra-light design and Cut-to-Fit.

1. Premium Quality Materials: we are very selective on the raw fur materials to ensure our finished products in high premium quality.

2. Rich Options in Colors and Comstomized Color Servie:

We can dye more colorswhich can extremly enrich your optionin colors.

We can also provide professional treatment according to the color samples.

3. Really fast speed from response-on-questions, production and shipment.

4. Free samples before order for quality inspection

5. Very-Immediate-Professional answers on the technical issues.

We know we're not the best yet, but we try every effort to make better than ever!!!

our service

1. High-quality materials: We attach great importance to the choice of raw fur to ensure that our finished products have high quality.

2. Rich color selection and mixed color services:

We can dye more colors, which greatly enriches your choice of colors.

We can also provide professional processing based on color samples.

3. From problem response, production and shipping to truly fast.

4. Free samples for quality inspection before ordering

5. Very professional answers to technical questions.

We know we are not the best yet, but we will make every effort to make ourselves better than ever! !! !!

1. Payment:T/T 30% deposit,balance 70% are paid before shipment.

2.Packaging Detail: We provide a wide range of packaging options to suit your needs: Blister, Poly bag, Insert Card, PP bag, PP box, PVC box, Paper bag, Clamshell Box, Display Box. We also can do your request packing .

3.Delivery Detail: 1- 30 days after receipting the deposit ,It's depends on quantity and products

4.Washing method: Warm water, gentle hand, natural dry, reusable .

5.Design: OEM designs are finished in 2-7days .

Gel heel cup and orthotic arch

Shock absorbing features

Comfortable for long lasting wear

Anti-allergic and Anti-bacterial material helps prevent odour

Maximum comfort while walking or prolonged standing

Foot support offers better posture

Easy to clean with soap and warm water

Environmentally friendly

Helps reduce stress and strain on the ankle, knee and lower back.

Provides instant relief from painful arches and are used to relieve pain from plantar fasciitis (policeman’s heel), Achilles heel, and tendonitis.

Ideal choice for physical, sporting and everyday use

Unisex suitable for sizes 39 to 45 – Trim to correct size

Q1. What is your terms of packing?

A: Generally, we pack our goods in one box and master cartons. If you have legally registered patent,

we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages

before you pay the balance.

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF .

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them,

no matter where they come from.

1.Designed by leading podiatrists, it is very suitable for the treatment of arch support and plantar fasciitis

2. Plantar fasciitis, flat feet, arch pain, tibial splint, varus, ankle pain, heel spurs, Morton neuroma, bunion inflammation, Meta toe muscle, leg pain, knee pain and lower back problems.

3. Full-length version is designed for shoes, sneakers and boots with removable insoles. Note that if they are too long, you can trim them with scissors to fit the shoes

4. Designed to support and help re-adjust knee-over feet, which is the leading cause of many foot disorders, including heel pain

5.Plantar fasciitis treatment guide comes with an ideal choice for impact exercise or daily use

Cleans all footwear

boots

golf shoes

athletic shoes

with step plate

Strong plastic bristles can easy take any mud or snow away from your shoes

Useful for cleaning all types of footwear

A great addition for a mud room, garage, shop, patio, and more

Mounts easily to any flat surface

Comes with mounting hardware

NATURAL WOOD: Selected Natural Beech Wood, Excellent grinding process with smooth surface

LONG DESIGN: More convenient to wear shoes, helps reduce bending over; relieving back pain and knee pain

NO ICY FEELING IN WINTER AND SHARP EDGE OF METAL HORNS: constructed of one piece wood that fits your hand and foot comfortably

SLEEK CRAFTSMANSHIP AND LIGHTWEIGHT: Easy to grip and handle; easily slides into the back of any shoe

1. Dip brush into bowl of water;

2. Add a healthy amount of cleaning solution to brush;

3. Dip brush back into bowl of water;

4. Brush shoes in circular motion to create foam;

5. Wipe clean with towwl. Repeat steps 1-5 as needed;

6. Leave to air dry.

1: REMOVE - For the best fit, take out the removable insole if there is one.

2: LINE UP & TRACE - Place the manufacturer's insole on top of the insole, line up both the backs

of the heels and the inside the edges, and then use a pen to trace the outline onto the insole.

NOTE: If the insole can't be removed, place the footwear on top of the insole and trace an outine

around the toe.

3: TRIM - Cut along the OUTSIDE of the traced line. Don't worry if it's too long, you can always trim a little more.

4: INSERT & TEST - Put the trimmed insole into the shoe.

NOTE: Test to make sure the insole can shift front to back inside about 1/16”or 2mm (about the width of a nickel), so the insole can work with the natural movement of the foot inside the shoe.

Our product and service was on the basis of customer satisfaction. So every order, we do the operation according to customer requirement. even in the productions step, we took the products procedure photos to our customer, tell customer each production links. once the final counter samples was out, we will deliver it to customer, let them to be safe; once the cargos is closed to finish, our QC will go to inspect cargos, we take care of each pieces,and make sure on defective pieces product in the bulk goods.

Once the cargos shipment. we will inform customer to pick the cargos timely. and tell customer if any delays will cause to extra dock fee, and container detention charge ect.

We have called and asked customer for cargos status once cargos get to customer warehouse.

and keeping communication timely. and realized products quality to be punctual to provide products information to clients. It's useful to customer to sell it.

We have surveyed customer market timely. also reported to customer any market conditions.

PAIN RELIEF: Bunion sleeve provides pain relief for hallux valgus, a toe overlapping, a bunion or toe drift via the gel pad to reduce friction between bunions and outside. Obviously, gel bunion sleeve protects bunions and hammer toe.

PROTECTION & COMFORT: All of our Bunion protectors and correctors provide the padding and cushion necessary to protect skin while walking and exercising. Our padding as a buffer to shield the sensitive bunion area, and prevent painful rubbing from occurring

We utilize only the best materials to produce a perfect bunion protector. Made of durable, orthopedic, medical grade materials to instantly reduce daily discomfort of bunion and Big Toe pain.

Bunion sleeve corrector can be worn in socks and shoes if need to walk at daytime or sleep at night. It looks invisible and fits for men and women.

1) How many colors for the 2.5mm/3mm wax cotton shoelaces?

- 2.5mm/3mm round wax cotton shoelaces is available in 10 colors.

2) Can you mix the laces colors?

- Yes, you can mix any laces colors from our existing laces colors. Any quantity per lace color is ok.

3) Do you accept custom color and custom length?

- Yes, we accept custom color, our MOQ is 200pair per custom color.

- Yes, we provide custom length, any length is ok. And we don't have the MOQ limit. Any quantity each lace length is ok.

4) Do you provide customized packaging?

- Yes, we currently have 4 different packaging options.

5) What is the MOQ?

- Our MOQ is 100pairs. You can mix all the laces colors from our existing 29 colors.

7) How to place the customized order?

- We would appreciate you could advise the customized order details including the laces color, size & packaging. Then we will quote you our best offer as you requested. Once the price is approved, we will send you Proforma Invoice. After getting your confirmation, we would appreciate it if you could make the deposit and send the payment remittance after payment. Then we will start to make the pre-production sample for your approval. After getting your confirmation, we will start in mass production.

8) Which payment method do you accept?

- Our MOQ is 100 pairs. We accept paypal, western union and bank transfer.

9) How is the payment term?

- Our payment term is 50% deposit, 50% balance payment via paypal, western union or bank transfer before the shipment after checking the clear shipment photos.

material(polyester) :Polyester fabric has high strength, low moisture absorption and super elasticity,

which is close to wool. By rubbing polyester fabric repeatedly, the original shape can be quickly restored

without leaving wrinkles.Polyester fabric has good heat resistance. It can be said that polyester in the

chemical fiber fabric heat resistance is the best,highly plastic, if made into pleated skirt, can well keep

pleating, do not need too much ironing.

A shoehorn or shoe horn (sometimes called a shoespooner, shoe spoon, shoe schlipp, or shoe tongue) is a tool with a short handle that flares into a longer spoon-like head meant to be held against the inside back of a snug-fitting shoe so that a person can slide the heel easily along its basin to the inner sole. Shoehorns have the same basic shape but the length or strength of the handle varies. Long-handled shoe horns are necessary for longer boots, while shoe horns with sturdy handles are useful for putting on boots or heavy iron shoes. They are sometimes used by people who, because of less flexible joints, wish to reduce straining or bending.

Originally, shoehorns were made from animal horns, hooves, or glass; luxury shoehorns were made of ivory, shell, silver, or bone. Although shoehorns made of bulls hooves are still available, metal, plastic, and wood are most often used.

Shoehorns appear to have originated in the late Middle Ages or Renaissance; in English a "schoying horne" is mentioned in the 15th century, though the French word chausse-pied is only found during the last half of the 16th century. Elizabeth I of England bought 18 shoe horns from her shoemaker Garrett Johnson between 1563 and 1566, then in 1567 ordered four more in steel from the blacksmiths Gilbert Polson and Richard Jeffrey, and then needed no more until 1586. Presumably these were used by many people in her household.

A group of more than 20 known English shoe horns are all signed and dated,to between 1593 and 1613,and made by Robert Mindum. All also are inscribed with the names of their owners; These include both men and women, including "JANE HIS WIFE" in 1612. The inscription on one is typical: "THIS IS AMBRES BVCKELLS SHOING HORNE MADE BY ROBART MINDVM ANNO DOMINI 1598". There is also other engraved decoration on all, including heraldic medallions, geometric designs and flowers, covering most of the surfaces, in a style characteristic of later scrimshaw. Their shape is very similar to modern examples, and the longest is 11 inches long; five are turned back at the narrow end in a kind of hook. Several have holes pierced in them, presumably for a cord or leather thong used for pulling them out of the shoe or hanging them up. One owner ("Hamlet Radesdale", 1593) is described as a citizen of London who is a cooper; none of the owners seem to be recorded otherwise. Joan Evans suggested, given the nature of the inscriptions, that Robert Mindum made them as a hobby and gave them to his friends. A powder horn similarly inscribed and decorated by him also survives. The British Museum also has a similar inscribed and decorated horn by another maker.

Inserts for shoes are an excellent way to get the support you need without a custom orthotic constructed by your podiatrist. But even the best shoe inserts don’t last forever. With normal use, you can expect your insoles to last about 6 months, but this varies depending on factors such as intensity of use (i.e., running vs. everyday activities) and foot structure. For serious runners, you may need new insoles every 3-4 months instead.

If you're hoping to polish your brown shoes, the first step is picking out the right shoe polish. A neutral shoe polish will shine your shoes without adding any color, or you can match your shoes to the right shade of brown shoe polish if desired. Clean your shoes with a leather cleaner before applying the polish using a microfiber cloth and circular motions. Once you've buffed each shoe so it's shining, you'll be able to enjoy your newly polished brown shoes.

Shoelaces have historically been made of materials like leather, hemp, or cotton—typical rope making materials. However, advances in the production of synthetic fibers like nylon and polyester and elastics have made a variety of shoelaces possible, not just ones that occur naturally. With more and more fashionable choices to accessorize your shoes, you'll want to keep them looking clean and fresh.

1

Remove the laces from the shoes. Once the laces are removed from the shoe, cleaning the laces is easier and more effective.

2

Brush any loose dirt or grime from the laces with your hands or a scrub brush. Dried caked on dirt and mud should come off fairly easily with a little bit of scrubbing.

3

Fill a sink or basin with warm water and add a small amount of soap or laundry detergent. The water will be used to saturate the laces. Soap helps loosen particles of dirt from the fabric of the laces for easier cleaning.

4

Let the shoelaces soak in soapy water for a few minutes. Allow the material to become thoroughly soaked. The shoelaces will likely swell and any surface grime will detach. Stir them around a bit if you’d like to promote this action.

5

Scrub the laces with a small brush (or an old toothbrush). Be aware that if you treat them harshly, they may crack or peel.

6

Refill your sink or basin with fresh water to rinse the laces. If dirt remains, repeat steps 2 through 6 until laces are thoroughly clean.

7

Hang the shoelaces on a sink or towel and dry. To avoid damaging and tightening the laces, do not place them in the dryer. This can damage the elastic fibers or structure and keep the laces of the shoe longer. It may take several hours for the laces to dry completely.

Physically active people who develop shin splints around the shin bones of their legs should consider the use of shoe insoles to prevent this pain.

Usually, pain caused by the tibial splint is felt inside or outside the area around the tibia of the leg, especially especially on the front and lower section.

People with flat feet are more susceptible to this pain due to uneven foot weight distribution due to increased foot pressure throughout the foot area, even if they are not participating in active physical activities such as running and walking. People who want to improve their physical health by doing some physical exercise (such as running and walking) should carefully choose the right insole for such activities to prevent tibial splints.

There are some ways in which shoe insoles can be beneficial and help prevent shin splints if appropriately selected. Shoe insoles can greatly help to reduce strain on the muscles attached to the shin bones by providing proper cushioning and support needed by these muscles, thus preventing shin splints. Click!

The use of shoe insoles to ensures that the feet are kept stable while an individual is running or walking hence the individual does not strain their knees and ankles to the point of developing shin splints.  People with flat feet may greatly benefit from the use of orthotics in their shoes as this would help reduce the unnecessary pressure and discomfort caused by the strain on the tissues and muscles found in the region around the ankles, and this strengthens the feet. Click for More!

If flat-footed people use the arch to support the insole during physical exercise, in addition to avoiding injuries, they can also experience great comfort and relief.

By always using insoles while exercising every time you run or walk, you reduce the risk of foot meta-bone injuries.

During various physical exercises, the meta bones on our feet need proper cushioning to prevent shocks, stresses and strains that can cause injuries to these bones.

Ladies who wear high heel shoes should reduce the number of times they wear the shoes, to reduce the risk of suffering shin splints and ankle injuries. You may further read about insoles at 

  https://www.insolechina.com/products

COMPLETE SHINE KIT: This Elegant Leather case includes Black Shoe Polish, Brush made from genuine Horse Hair, Sponge Daubes, Metal Shoe Horn & Durable Shine Cloth

MAKES A GREAT GIFT: :An Easy-to-carry Shoe Polish Set great for business travelers, military services or holiday travelers. Take it with you wherever you go to keep that sharp look

INCLUDES: 3 brushes, one shoehorn/suit brush, one applicator sponge, two tin black polish and a buffing/shining cloth

EXCEPTIONAL VALUE: This Professional men shoe care kit is Elegant, Compact, Durable, comes in a classic white box for easy gift-wrapping. A wonderful gift for men, for your boss, for dads, young professionals or special occasions like Weddings.

COMPLETE SHINE KIT: This Elegant Leather case includes Black Shoe Polish, Brush made from genuine Horse Hair, Sponge Daubes, Metal Shoe Horn & Durable Shine Cloth

MAKES A GREAT GIFT: :An Easy-to-carry Shoe Polish Set great for business travelers, military services or holiday travelers. Take it with you wherever you go to keep that sharp look

INCLUDES: 3 brushes, one shoehorn/suit brush, one applicator sponge, two tin black polish and a buffing/shining cloth

EXCEPTIONAL VALUE: This Professional men shoe care kit is Elegant, Compact, Durable, comes in a classic white box for easy gift-wrapping. A wonderful gift for men, for your boss, for dads, young professionals or special occasions like Weddings.

• ASY TO USE & CONVENIENT: Quickly and easily covers scuffs and brings dull black leather back to life. Our applicator sponge is simple to use and perfect for a quick, fast shine when you don't have time for a traditional one. Use our polish to maintain your leather goods and keep a polished, well groomed appearance at all times. Our portable and convenient design make it easy to carry in your handbag or briefcase for touch ups or an on-the-go shine. An essential tool to have in your home, office
• EXCEPTIONAL QUALITY: We use premium materials not found in other lesser quality brands. Do not be fooled by imitation products! Our Liquid Shoe Polish is made to strict, tested, trade-secret standards that ensures it is safe to use on high end leather goods. It is an excellent Christmas, birthday, stocking stuffer, graduation or anniversary gift for men, women, boyfriend, girlfriend, businessmen, or groomsmen. We stand behind the quality of our products with a 100% SATISFACTION GUARANTEE.
• NO MESS OR CLEANUP NEEDED: Our all-in-one liquid shoe and leather shine is dye free, neat and safe to use. Use it to maintain shine in one step without the hassle of a brush, cloth, or shoe or leather wax. There is no buffing required and no brushes to clean afterward. Simply shake, apply and allow item to dry. Its handheld design, applicator sponge and compact size makes it perfect for travel or an on the go shine that lasts several.

Practical and helpful massaging silicone gel insoles Provides special care and firm support for your feet. Soft and comfortable, helps relieve rubbing pain Prevent callous and blisters caused by new shoes with this pair. The gel absorbs the impact on the whole foot and can help reduce stress and strain on the ankle, knee and lower back. Perfect for physical and sporting activities as well as everyday use. Durable and Hygienic Anti-fungus, anti-bacterial and washable, providing all day comfort and molding to the shape of the feet along with shock absorbing and cushioning features.

Features

This technologically advanced design allows grooves in the gel to act like tiny springs, absorbing the stress of impact on the high pressure points in the heel and the ball of the foot

This works by the gel first collapsing to absorb the shock, then it springs back, providing energy return with each step

They are an ideal choice for physical and sporting activities as well as for everyday use providing comfort and support when you need it most

The gel absorbs the impact on the whole foot and can help reduce stress and strain on the ankle, knee and lower back

Trim to fit for a custom fit

Specification:

Made from Cedar Wood.

Adjustable width split toe design with a slider plate for perfect width fit

Can be adjusted for width and absorbs moisture naturally

Fully contoured heel to comfortably fill the shoe for a snug fit

Support perfect shoe shape, prevents creases and wrinkles

Color: Natural wood color

Please noted:

1、As we all known, the shoes at the same UK size maybe have different lengths. We strongly recommend you measure the length of shoes before you purchase them.

2、0.5-1cm deviation exists due to different measure ways.

3、If you are not sure the length of shoes, we suggest you buy a smaller size. It will be suited for used too.But,if you buy the shoe tree longer than your shoes. You have to replace it. It will take more time and money for both of us.

The wooden brush perfect for clothes cleaning, shoes polishing , leather furniture or handbags, car interior, carpet, rug, hat for dust remover, pet hair free and more , it will be a real life helper for household and fantastic performance will meet your different daily needs.

Clothes brush is made of environmental real wooden handle and soft natural horsehair bristle brush,, portable for travel , recommended as gift for friends and family.

Ergonomic grooves handle design are easy to fit for your fingers , the main body is made of natural wood and it can be used for a long time.

Just need simply stroke for removing dust , dirt ,lint or pet hair for your garment ,shoes and furniture, the clothing and shoes will look better and last longer , easy to use, that save your time, please pay attention to cleaning up the brush after each using and keep it dry on hanging.

Suede & Nubuck

Special care needs to be taken for both Suede & Nubuck. There is not much visible difference between the two.  Suede leather has been sanded on the inner layer of the skin, while Nubuck is sanded on the outer or exterior skin of the animal, since the outside layer of a skin is tougher, Nubuck tends to be more durable.

SUEDE BRUSHES

A good brush is a must for caring for Suede and Nubuck. The fine fibres you feel standing up on Suede & Nubuck is referred to as the nap. A Suede Brush will help remove dust and dirt trapped within the nap keeping the nap looking fresh and smooth. Regular brushing is an easy and an effective way to care for your Suede and Nubuck shoes. They are also good for Fabric and some Textiles.

Against shoe creases: say goodbye to the toe crease, this shoes creases protector not only makes your shoes look shiny and bright, but also restores old shoes; Suitable for a variety of toe curved on the market

Breathable design: 24 venting holes designed to keep the shoes dry and breathable, avoiding being sultry and humid; Shoes creases protector will extend the lifespan and improve the appearance of your shoes

Quality: PE and TPR material to ensure a strong hardness, which makes the shoes creases protector low-temperature-resistant, resilient and washable

Smart design: no need to worry that they will move while you are walking; The design makes sure it can firmly stay stuck to the top of shoe.

ODOUR KILLER: Anti-odour design based on Active Carbon layer. Draws moisture away from sweaty and smelly feet.

QUALITY AND LIGHTWEIGHT: Sturdy, durable and lightweight suitable for supporting foot.

CUT TO SIZE: Trim and cut to fit to fit any shoe type and size, with size guides printed on the inserts (product includes left and right inserts).

AIR CIRCULATION: Insole perforation provides excellent air circulation and enhances your walking experience.

WASHABLE: Hand-washable at 30 degrees Celsius.

BAREFOOT SHOES: Want to go “sockless” over the summer? These insoles are ideal for summer and spring shoes that you wear barefoot

ABSORB SWEAT: The top layer of the insoles is made of cotton terry cloth, which brings nice and pleasant feel and also absorbs sweat and moisture, thus preventing bacteria buildup in your shoes

BREATHE: The bottom layer made of latex foam is perforated to ensure air circulation and prevent your feet from heating up

CUT TO FIT ADJUSTABLE SIZE: Worried about not getting the right size? Just cut out the size pad according to the cutting guides.

Corns are a cone shape of hard skin caused by pressure and friction which could be caused by ill fitting footwear, changes in foot structure which in turn can affect your gait (the way you walk) or bony deformities. They can be particularly painful and limit walking and footwear.

1high brightness

Made of imported palm wax, high gloss

2,Convenient quick polish

Lightweight and portable, fast polishing

3,Refreshing formula

fast film formation, not sticky

4,Elastic,Durable sponge

High density sponge, toughness,durable

5,Not hurt leather surface

Soft sponge, do no harm to the surface of the shoe

This is a 5D memory foam insole with heel pad and insole
This thickened women's insole are made of polyurethane sponge， can absorb sweat, prevent foot odor, and massage the sole
How to use：
Our shoe heel pads have a sticky backing that keeps them in place. Cushions are designed to fit the contour of the heel section of the shoe. Simply remove the adhesive backing and place the pads on the inside heel of the shoe
Be careful to align the insole heel with the heel of the shoe.
This insole is clearly printed with a number line, you can freely cut according to your own size, convenient, intimate and practical.

FLEXIBLE - While other arch support sleeves may be too tight, too loose, or not supportive enough, this gel pads stretch to fit your feet, and stay in place with a snug fitting sock, to give you long-lasting relief from foot and heel pain that comes with flat feet & plantar fasciitis.

COMFORTABLE - They’re supple, not stiff like other products! Just slide them on, feel the pad compress under your foot, and walk your way to a more active life.

EFFECTIVE- Heel pain, plantar fasciitis, bone spurs, and flat feet hurt without proper support! With our comfortable, discreet, and effective arch gels, you’ll be back to hiking, biking, or running as quickly as possible!

EASY TO USE - Our silicone arch support set is flexible but firm, easy to wash, and durable so you can wash and reuse them multiple times.

• Toe Spreader: toe isolator contains medical-grade mineral oil that moisturizes and nourishes affected skin and cushion toes against friction. Toe spacer can reduce pain associated with hammertoes or misaligned toes
• Versatile: gel toe spacer is designed to relieve pain associated with crooked toes, toe drift, and overlapping toes. The hypoallergic toe spacer cushions callusing skin, thick skin, and can provide bunion pain relief too
• Material: this toe aligner for overlapping toes is formulated from latex free and allergy-free materials, making it ideal to be used for extended period
• Comfort Fit: foot care product assures a snug fit as it is anatomically designed to stay secured between toes, reducing pressure and friction. The toe divider is suitable for most types of footwear and foot sizes specially the big toes to reduce pain

15ml/25ml shoe polish,25ml white shoes cleaner,15ml sneakers whitening,15ml leather polishing nourishing oil

sneakers whitening:

Features:

1.Can effectively decontaminate and make cleaning white shoes easy

2.You can carry it on business trips, wash it at any time, keep your shoes clean and tidy and maintain a good image

3.Can remove yellow, stain and not hurt shoes

4.This product can be used for leather, rubber edge, etc., has a good effect of covering yellow. Particularly suitable for the use of oxidized yellow or dyed sneakers and sneakers.

leather polishing nourishing oil:

Features:

1.Water resistant and leather nourishing.

2.Safe and non-toxic.

3.Provide clear mirror shine for shoes.

4.Penetrates the leather to renovate the colour.

PU is a man-made synthetic material with the texture of leather, very strong and durable, and low in price.

PU synthetic leather is used to replace PVC artificial leather, and its price is higher than PVC artificial leather. In terms of chemical structure, it is closer to leather fabric. It does not use plasticizers to achieve softness, so it will not become hard and brittle. At the same time, it has the advantages of rich colors and various patterns, and the price is cheaper than leather fabrics. So it is welcomed by consumers.

1. Because the inside of the shoe is not easy to clean, the insole can be used to clean and keep the inside of the shoe dry.

2. It can protect shoes. If there is no insole, the inner surface of the shoe may be worn for a long time.

3. The need to protect the feet. Padded insoles, so that the feet are not easy to wear, but also feel comfortable.

4. The method of indirect adjustment of the size of the shoes. Sometimes the shoes we buy may feel larger. For some reasons, we can't change them, so we can adjust the size by padding.

To prevent foot soaks, we must pay attention to:

1. Shoes and socks should be suitable. Shoes should not be too high or too small. It is best to wear second-hand rubber or cloth shoes. Women should not wear high-heeled hard-soled leather shoes. The insole should be flat, socks should not be damaged, no wrinkles, and sand in the shoes. It should be removed in time and the footwear should be kept dry;

2. The walking tour should be gradual, approaching first and then far away, the footsteps should be even, the landing should be steady, not fast and slow;

3. Before going to bed, scald your feet with hot water to promote local blood circulation, and apply hand massage to the soles of the feet.

1. breathable

Natural latex insoles have a lot of vent holes with a fine mesh structure. These holes can dissipate the waste heat and moisture discharged by the human body, which can promote natural ventilation and maintain comfort inside the shoes.

2. Anti-mite and anti-bacteria

Because the oak protein in the latex can inhibit the lurking of germs and allergens, it meets the requirements of environmental protection, can inhibit the growth of germs and mites, is free of static electricity, and emits a natural milk fragrance.

When people exercise, they are done by the power of the feet, so that a relatively large impact is concentrated on the feet; in addition, the feet will produce a lot of sweat, and the feet have more bacteria, which reduces the feet. The comfort of the environment. The soles of most sports shoes have the characteristics of shock absorption and high elasticity, but it is obviously not scientific to rely on soles to improve the comfort of sports. This poses a problem for insole manufacturers. Shock absorption cannot affect elasticity. Shock-absorbing materials such as memory foam obviously cannot meet such requirements. In the selection of materials, after testing various materials, we have the following two materials Suggest:

1: High-density sponge: Use this kind of material for insole processing, which solves the problems of sweat absorption, ventilation, and shock absorption; and this kind of material also has strong high elasticity.

2: High-density EVA: Although this material has poor air permeability, its resilience and flexibility are higher than other materials, and its shock absorption performance is also very good. It can be used as a preferred material.

Baby’s feet are particularly sweaty. We will choose cotton socks for him, and we need to pad him with insoles. However, because the baby’s feet are sweaty, what should we pay attention to when padding the insoles?

Answer: When the baby needs the insole, the mother must teach the baby how to use the insole correctly. First of all, everyone needs at least two pairs of insoles, and the insoles used for a day will be replaced every night.

Hang in the sun the next day and put on another pair of insoles. Because long-term use of a pair of insoles can easily cause the bacteria in the shoes to multiply, causing foot odor and beriberi. Moreover, it is best to clean the insole every other week.

How to choose an insole is also exquisite. For babies with a lot of activity, their feet sweat a lot, so leather insoles should not be used. In contrast, using foam insoles with better moisture absorption properties,

Because the foam has better moisture absorption properties. In addition, activated carbon or deodorized sponge insoles can also be used.

Almost everyone can benefit from a good pair of PU insoles. The main functions of the insole are as follows:

1. Is shock absorption. Although the shoe itself has this function, the role of the insole cannot be underestimated.

2. Is stability and support. The back half of the insole is a support made of plastic. Will give the feet a good support. To a certain extent, the support of good insoles is stronger than the support of ordinary boots on the ankles. It may sound nonsense, but in fact, a good insole is huge.

3. It is correction. Most people have problems with their gait, such as flat feet, varus, and valgus. Incorrect gait will not only cause problems on the feet, but also cause problems in the ankle, knee, and even waist. A good PU insole can correct foot posture.

Office workers wear socks almost all day long. If the socks cannot quickly absorb foot sweat and inhibit the growth of bacteria, the odor problem cannot be solved. It can effectively absorb the feet to achieve a deodorant effect. It is definitely an office worker to keep feet comfortable Ideal for dryness.

Many women like to wear shoes such as riding boots and snow boots. Although these shoes are warmer, they are also less breathable. If they are wearing poor quality socks, they may generate a noticeable foot odor when they take off the boots. , Causing an embarrassing situation. Therefore, as much as possible of air-permeable shoes, if you still have to wear airtight boots, be sure to wear a breathable and deodorizing pure and healthy insole to reduce the generation of foot odor.

Many people have foot odor problems but do not realize it, or know that they have foot odor problems but do not know how to solve them. Here we strongly urge the use of pure light and breathable deodorizing healthy insoles to improve, not only make you wear comfortable and healthy, It can also avoid embarrassing situations that may occur in the office environment.

Choosing the right length for your shoe horn

When it comes to choosing which tool will be most beneficial to your routine, it is important to consider how you put on your shoes.

If it is easiest to put your shoes on while standing, the better option is to go with a long shoe horn. On the other hand, if you sit on a chair when sliding on your shoes, it will be easier to do so with a shorter shoe horn.